PRODUCTS CENTER
The Vinyl sheet pile (PVC Sheet Pile) is a new type of high strength composite material,which is extruded by a specia lprocess. The shape of the sheetpile designed according to the principle of physics, adopts large moment of inertia section design, and is combined with multi-direction concave and convex joints to become a new type of continuous, high strength and high lateral bending resistance green bank protection and flood control structure.Ecological sheet pile can effectively replace traditional materials, such as steel sheet pile, concrete sheet pile or wood sheet pile.It is widely used because of its excellent performance parameters and low investment cost.
Steel prefabricated components refer to assembly parts that are produced and processed to a certain extent in the factory, with an independent structural system, and can be directly transported to the construction site for installation. Common steel structure prefabricated components include steel beams, steel columns, steel bridge beams, steel structure floor slabs, etc. According to their application and form, they can be divided into frame prefabricated parts, plate prefabricated parts, steel pipe prefabricated parts, etc. The advantages of this structure include high strength, light weight, good overall stiffness, and strong resistance to deformation. It is particularly suitable for constructing large-span, ultra-high, and ultra-heavy buildings. After prefabrication in the factory, it can greatly save installation and welding work on the project site. Steel prefabricated components can be used for various types of mountain bridges, railway bridges, highway bridges, urban light rail bridges, substations, substations, ship structures, elevators, offshore platform structures, etc
The main load-bearing components of a building are divided into horizontal and vertical walls, which mainly bear horizontal and vertical loads. Column - a component that mainly bears vertical loads, used to support floor or roof loads, mainly divided into frame columns, component columns, etc. Beam - a horizontal load-bearing component used to support the load on floor or roof panels, mainly divided into square or cross shaped steel structures. The load-bearing structure places great emphasis on the quality of welding in production, and generally requires full fusion welding with very precise requirements for straightness and torsion. When it comes to complex welding component testing, in addition to conventional MT and UT testing, special testing molds need to be made to ensure that the dimensions of each small component are consistent with the drawing requirements.
The basic components of a bridge include the upper structure, lower structure, support system, and ancillary facilities. The substructure refers to the part of a bridge located below the support, also known as the supporting structure, which includes piers, abutments, and the foundation of piers. The adjacent two span bridge is located in the middle of the bridge, and the basic concept of the box girder structure is that all upper structures become integral hollow beams. When the main load passes through any position on the bridge, all parts of the hollow beam (ribs, top plate, and bottom plate) participate in the force as a whole. The lower structure is usually made of steel plates, steel pipes, angle steels, H-beams, and other parts, which are welded together through components and ultimately connected on-site by welding or bolts. Xinyue can provide customers with design analysis, drawing splitting, steel production, welding and forming work, etc.